Product Detail
Product Tags
Related Video
Feedback (2)
Sticking to the principle of "Super Quality, Satisfactory service" ,We are striving to be a good business partner of you for Wheel Excavator , Mountain Raise Wheel Loader , Lg 8.5 Kg Top Load Washer , We warmly welcome mates from all walks of life to hunt mutual cooperation and develop a more good and splendid tomorrow.
Factory supplied Big Crane - HBXG-Wheel Loader XG955T Specifications – HBXG Detail:
OVERALL DIMENSION
| Length(with bucket on ground) |
8100(mm) |
| Width(to outside of wheels) |
2800(mm) |
| Bucket width |
2946(mm) |
| Height(To the top of the cab) |
3450(mm) |
| Wheel base |
3100(mm) |
| Tread |
2200(mm) |
| Min. ground clearance |
450(mm) |
MAIN TECHNICAL SPECIFICATION
| Rated load |
5000(Kg) |
| Operating weight |
16500(1±5%)KG |
| Rated bucket capacity |
3m³ Optional 2.2-4.5 (m³) |
| Max. breakout force |
165kN |
| Max. dump clearance |
3140(mm) |
| Dump reach |
1180(mm) |
| Dump angle at any position |
≥45° |
| Digging depth(with bucket bottom horizontal) |
27(mm) |
| Min. turning radius
|
| (1) Outside of bucket |
6689(mm) |
| (2) Outside of rear wheel |
5970(mm) |
| Pivot angle frame |
38° |
| Oscillating angle of rear axle |
+11° |
| Lifting time of bucket |
≤6.2(sec.) |
| Lowering time of bucket |
≤3.8(sec.) |
| Dumping time |
≤1.8(sec.) |
Traveling speed(Km/h)，2 forward and 1 reverse
| Gear |
1st |
2nd |
| Forward |
11.7 |
40.3 |
| Backward |
15.9 |
|
Diesel engine
| Model |
Weichai Engine WD10G220E23 |
| Type |
Direct injection. Turbocharged. Water cooling |
| Rated output |
162 kW |
| Inter-bore of cylinder/Stroke |
126/130(mm) |
| Total exhaust of cylinder |
9.726(L) |
| Model of starting motor |
KB-24V |
| Power of start motor |
7.5(KW) |
| Voltage of starting motor |
24(V) |
| Rated speed |
2000(r/min) |
| Max. Torque |
>900(N.m) |
| Starting type |
Electric |
| Min. specific fuel consumption |
<220g/Kw.h) |
| Engine specific oil consumption |
0.95-1.77(g/Kw.h) |
| Net weight |
1000(Kg) |
Transmission System
| Hydromedia Transmission
|
| Model |
ZL50B-012 |
| Type |
4-elements.single stage |
| Torque ratio |
4 |
| Cooling type |
Pressure oil circulating |
| Type of transmission case |
power shift, spur gear constant-mesh |
| Gear shift position |
2 Forward and 1 reverse gears |
| Axle and Tire
|
| Type of main reducer |
spiral bevel gear, single stage |
| Gear ratio of main reducer |
4.625 |
| Type of final reducer |
Single stage planetary |
| Gear of ratio of final reducer |
4.929 |
| Gear ratio |
22.795 |
| Max. drawing force |
150kN |
| Size of tire |
23.5-25-16PR |
Working Device Hydraulic System
| Model of oil pump |
JHP2080S |
| System pressure |
18MPa |
| Model of Mutichannel conversion valve |
GDF-32-YL18 |
| (D*L)Dimension of lifting cylinder |
Ф160*90*810(mm) |
| (D*L) Dimension of tilting cylinder |
Ф180*90*563(mm) |
Steering System
| Type |
Middle articulated frame. Full-hydraulic Steering |
| Model of steering pump |
JHP2080S |
| Model of redirector |
TLF1-E1000B+FKB6020 |
| Model of priority valve |
YXL-F250F-N7 |
| System pressure |
16MPa |
| Dimension of steering cylinder |
Ф90*400 (mm) |
Brake System
| Type of traveling brake |
Caliper disc brake |
| Air over oil activate 4 wheel brake |
| Air pressure |
6-7.5(kgf/cm2) |
| Type of parking brake |
Hand brake |
| Flexible shaft control clamp brake |
Oil Capacity
| Fuel(diesel) |
250L |
| Engine lubricating oil |
24L |
| Oil for converter and gear box |
45L |
| Oil for hydraulic system |
180L |
| Oil for driving axles(F/R) |
36L |
| Oil for final reducer |
14L |
| Oil for brake system |
3L |
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory supplied Big Crane - HBXG-Wheel Loader XG955T Specifications – HBXG, The product will supply to all over the world, such as: Indonesia, Pretoria, Saudi Arabia, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Martina from Morocco - 2017.05.21 12:31
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Doris from Czech - 2017.08.18 18:38